You’ll find the Taylor Made 70906 Boat Guard Eclipse is a trailer‑ready, breathable cover that fits 19–21 ft V‑hull runabouts up to a 102‑inch beam and uses Hot Shot™ acrylic‑coated polyester for water shedding and UV resistance. It has reinforced hems, tie points, sewn vents and an elastic hem for reduced flapping and chafe during transport. Expect a snug, even fit when measured on centerline; keep going to see fit, maintenance, and alternative options.
Some Key Takeaways
- Constructed from Hot Shot™ marine‑grade acrylic‑coated polyester for water shedding, UV resistance, and mildew inhibition.
- Universal fit targets V‑hull runabouts 19–21 ft long with beams up to 102 in, allowing 2–4 in beam allowances.
- Trailer‑specific features include sewn vents, reinforced tie‑down straps, and an elastic cord hem to minimize flapping.
- Breathable fabric and sewn ventilation reduce condensation while maintaining tensile strength and dimensional stability.
- Recommended for trailer users prioritizing durability and trailering stability; consider mooring or custom covers for long‑term dock use.
Quick Verdict: Is the Taylor Made 70906 Boat Guard Eclipse Worth Buying?
Bottom line: if you trailer a V‑hull runabout 19–21 ft long with a beam up to 102 in and need a durable, trailer‑ready cover, the Taylor Made 70906 Boat Guard Eclipse is worth buying. You’ll get precise trailer-specific features—sewn vents, tie-down straps, elastic hem—that minimize flapping and abrasion during transport. Fit is universal for the stated dimensions, providing full exterior coverage without complex rigging. Fabric performance supports all-season use and easy cleaning after trailering grime. If you prioritize functional protection over bespoke looks, the two-tone scheme allows limited aesthetic customization and compact packing fits common storage solutions. This product is tailored for those who need reliable winter protection for their boats with boat winter covers designed for trailer use.
What the 70906 Cover Is Made Of and How Durable It Is
Because Taylor Made built the 70906 from its Hot Shot™ marine‑grade acrylic‑coated polyester, you get a cover engineered for longevity: the 6.25 oz. fabric combines a breathable polyester base with an acrylic outer coating to shed water, resist UV degradation, and inhibit mildew while keeping tensile strength and dimensional stability under repeated use. You’ll note acrylic polyester construction delivers consistent tensile and tear resistance for trailering stresses. Sewn ventilation reduces internal condensation without compromising material integrity. Hemmed edges, reinforced tie points, and measured stitch density minimize seam failure. Expect durable, serviceable performance when used and maintained as specified. This makes the cover a practical choice for boat owners seeking reliable protection during trailering and storage.
How the 70906 Fits V‑Hull Runabouts (19–21 Ft, ≤102 In Beam) and Tips for Measuring
Having established the cover’s material and construction, let’s examine how the 70906 conforms to V‑hull runabouts sized 19–21 feet with beams up to 102 inches. You’ll follow a strict measuring protocol: measure centerline length from bow tip to transom, then record maximum beam across gunwales. Allow for beam allowances (usually 2–4 in.) to accommodate hull fittings and side profiles. Check centerline alignment when positioning the folded cover on the boat to prevent cocking. Confirm clip placement and tie‑down routing aligns with trailer hardware and cleats. Final fit should be snug with evenly distributed tension. Also consider adding dedicated boat organizers to keep gear secure and prevent uneven wear on the cover.
Real-World Performance: Trailering, Weather Resistance, and Maintenance
When you’re trailering the 70906, it stays taut and secure rather than ballooning or chafing against the hull thanks to its elastic cord hem, sewn-in vents, and reinforced tie-down straps that route around trailer hardware; this engineered tensioning minimizes flapping at speeds typical for short drives to the launch and reduces abrasion points at gunwales and rub rails. You’ll notice low trailering noise when straps are correctly routed and tensioned. Hot Shot™ fabric sheds water and resists UV; sewn-in vent performance prevents trapped moisture. Clean with mild soap and rinse; inspect seams and strap anchors periodically for wear to maintain function. Ideal dock protection includes using the correct dock bumpers to prevent impact damage when mooring.
Who Should Buy the 70906 and Best Alternatives to Consider
If you trailer a V-hull runabout between 19 and 21 feet and need a purpose-built, low-profile cover that stays secure on short launches, the Taylor Made 70906 is a strong, technical choice. You should buy it if you prioritize trailering stability, UV resistance, and breathable acrylic fabric that eases boat maintenance after salt or grime exposure. Consider timing your purchase before peak season to avoid stockouts. Alternatives: heavier-duty mooring covers for long-term dock storage, custom-fitted covers for odd beams, or economy polyester models if budget trumps abrasion resistance. Match choice to storage method, climate, and towing frequency. For guidance on selecting the right top for your boat, review our Top Tips for Choosing the Perfect Bimini Top and match features to your boating habits.
Some Questions Answered
Does the Cover Include a Storage Bag?
No, it doesn’t include a storage pouch. You’ll receive the cover only, folded into its packaged dimensions (about 11.5 x 16 x 10 inches). If you want organized storage, plan to add your own breathable mesh bag or pouch to prevent trapped moisture and allow ventilation. Using breathable mesh helps the acrylic-coated polyester dry faster and reduces mildew risk; it also keeps the elastic hem and tie-down straps neatly contained for trailering and off-season storage.
Is There a Warranty and How Long Does It Last?
No specific warranty duration is listed with the product; you shouldn’t assume a manufacturer warranty unless the seller states it. Check your purchase documentation for explicit warranty duration and any registration requirements. Coverage limitations typically exclude damage from misuse, improper installation, prolonged UV degradation, and normal wear from trailering. Retain receipts and inspect terms for prorated repairs or exclusions, and contact Taylor Made/Lippert for definitive warranty duration and coverage limitations.
Can Straps Be Routed Without Touching Rub Rails?
Yes — you can route straps to avoid rub rails. Route strap routing through the sewn-in tie-down points and under the hull where clearance exists, keeping webbing clear of rub rails to preserve hull protection. Use the elastic cord hem to tension the cover, feed straps along the hull’s contour, and secure at transom and bow cleats. Inspect for contact spots and add protective sleeves if any chafing risk appears.
Is the Fabric Color Fade-Resistant Over Years?
Yes — the fabric’s engineered for long-term color retention. You’ll see good pigment stability because the Hot Shot™ acrylic-coated polyester is UV-tested and formulated to resist photodegradation. Over years in sun and humid conditions it won’t hold pristine original color but will fade slowly rather than rapidly. Expect gradual lightening; regular cleaning and avoiding prolonged ozone or chemical exposure will maximize UV resistance and pigment stability.
Are Replacement Parts Available From Taylor Made?
Yes — you can get replacement availability through Taylor Made. You’ll contact authorized dealers or Taylor Made/Lippert customer service for specific parts like vents, straps, hems. If OEM parts aren’t available, consider aftermarket alternatives that match material and specs. For minor damage you can perform DIY repairs using marine-grade acrylic-coated polyester patches, UV thread and sealed seams. Keep documentation and part numbers to make certain correct replacements.
